DATE - 2023/04/21
Infotainment Head Unit 車用娛樂資訊系統主機
Digital terrestrial tuners, audio power amplifiers and multi-constellation GNSS positioning devices.
數位頻道調諧紐、音頻功率放大器和多衛星導航設備。
T-BOX車載終端盒
Telematics Box is the hardware responsible for Internet of Vehicles and Cloud Synchronization for digital integration
車載終端盒是負責車聯網和雲端同步數位化整合的硬體
4G LTE
The TVS Diode is the main countermeasure for Automotive LTE module application
瞬態電壓抑制二極體是車用LTE模塊應用的主要對策
BMS 電池管理系統
Battery Management System :High voltage power supply for motor 380~420V Low voltage power supply for control panel (Precision action, start up or switch off )
電池管理系統:馬達高壓電源380~420V 控制面板低壓電源(精確執行,啟動或關閉)
Dashcam 行車紀錄器
Aftermarket installed product. TVS, Schottky, ESD are commonly used as protection and transmission
售後安裝產品。 TVS、蕭特基、ESD常用作保護和傳輸
ADAS 高級輔助駕駛系統
Advanced Driver Assistance System. Millimeter wave radar is employed for the pedestrian detection and vehicle distance detection
高級駕駛輔助系統。 毫米波雷達用於行人檢測和車距檢測
TPS/TX
TX Module is employed for the tire pressure detection and temperature of tire.
Because it continue using for a long period, 3 voltage lithium battery is the main power supply and it requires energy-saving components.
Antenna will increase voltage during transmitting, thus ESD is required as protection.
TX Module用於輪胎的胎壓檢測和溫度檢測。
由於長期持續使用,3伏鋰電池是主要電源,需要節能元件。
天線在傳輸過程中會增加電壓,因此需要ESD作為保護。
TPS/RX
RX Module main purpose is interpretation of data from Tx
The monitor main power supply is from Car battery. The power regulation of IC or MCU may destruct by Battery Surge; therefore placed in ESD or TVS as protection. Display Button occasionally been pressed, also ESD could breakdown MCU or RF IC from inside, thus ESD is required as protection.
RX 模塊的主要目的是解釋來自 Tx 的數據
顯示器主電源來自汽車電池。 IC或MCU的電源調節可能會被電池浪湧破壞; 因此置於 ESD 或 TVS 中作為保護。 顯示按鈕偶爾被按下,ESD也可能從內部擊穿MCU或RF IC,因此需要ESD作為保護。
Sunlight Sensor 陽光感測器
The sensor detects the intensity of the rain and transmits its information to the windshield wiper's control electronics.
傳感器檢測雨的強度並將其訊息傳輸到擋風玻璃雨刷的控制設備。
Instrument Cluster 儀表板
Instrument Cluster backlight is mainly use in LED light up or brightness adjustment to provide a richer vision. It will pass through Schottky,Mosfet and become the switch. In addition, LED can adapt TVS to protect and avoid the damage from the surge.
儀表組背光主要用於LED點亮或亮度調節,以提供更豐富的視覺效果。 它將通過蕭特基、Mosfet 成為開關。 此外,LED可以適配瞬態電壓抑制二極體來保護和避免浪湧的損壞。
LED Headlight LED頭燈
The battery input will cause alternating current wave because of back electromotive force. Therefore, place TVS at the input of the battery.
電池輸入會因為反電動勢而產生交流波。 因此,將瞬態電壓抑制二極體置於電池的輸入端。
LED Tail Light LED尾燈
The tail input and stop input power busbars are recommended to use Rectifier, Schottky or Switch diode because of reverse voltage protection when there is a peak in voltage to ensure the LED Control IC won't breakdown.
建議尾燈輸入和煞車燈輸入電源使用 整流器,蕭特基或開關二極管,因為反向電壓保護當電壓出現峰值時,以確保 LED 控制 IC 不會故障。
Digital terrestrial tuners, audio power amplifiers and multi-constellation GNSS positioning devices.
數位頻道調諧紐、音頻功率放大器和多衛星導航設備。
P/N | Product | Package | Specification | RefDes |
ATV15C260JB-HF | TVS | SMC | 26V/1500W | D1 |
ATV15CXXXJB-HF | TVS | SMC | 1500W | D1 |
ACDBA340-HF | Schottky | SMA | 40V/3A | D2 |
ACDBA360-HF | Schottky | SMA | 60V/3A | D2 |
ACDBB540-HF | Schottky | SMB | 40V/5A | D2 |
ACDBC540-HF | Schottky | SMC | 40V/5A | D2 |
ACPDQC5V0ESPC-HF | ESD | 0402 | Bi- 5V/0.28pF | D3, D5 |
ACPDT-24VE-HF | ESD | SOT-23 | Bi- 24V/20pF | D6,D7 |
ACPDQC24VE-HF | ESD | 0402 | Bi- 24V/20pF | D6,D7 |
ACPDQC5V0CHT-HF | ESD | 0402 | Bi- 5V/30pF | D4 |
T-BOX車載終端盒
Telematics Box is the hardware responsible for Internet of Vehicles and Cloud Synchronization for digital integration
車載終端盒是負責車聯網和雲端同步數位化整合的硬體
P/N | Product | Package | Specification | RefDes |
ATV15C260JB-HF | TVS | SMC | 26V/1500W | D1 |
ATV15CXXXJB-HF | TVS | SMC | 1500W | D1 |
ACDBA340-HF | Schottky | SMA | 40V/3A | D2 |
ACDBA360-HF | Schottky | SMA | 60V/3A | D2 |
ACDBB540-HF | Schottky | SMB | 40V/5A | D2 |
ACDBC540-HF | Schottky | SMC | 40V/5A | D2 |
ACPDQC5V0ESPC-HF | ESD | 0402 | Bi- 5V/0.28pF | D4, D5 |
ACPDT-24VE-HF | ESD | SOT-23 | Bi- 24V/20pF | D3 |
A2N7002H-HF | MOSFET | SOT-23 | 100V/50A | Q1 |
AMMBT3904-HF | Transistor | SOT-23 | 60V/0.2A | Q2 |
4G LTE
The TVS Diode is the main countermeasure for Automotive LTE module application
瞬態電壓抑制二極體是車用LTE模塊應用的主要對策
P/N | Product | Package | Specification | RefDes |
ACPDQC5V0ESPC-HF | ESD | 0402 | Bi- 5V/0.28pF | D4 |
ACPDUC24V-HF | ESD | 0603 | Bi- 24V/10pF | D3 |
ACPDQC5V0CSP-HF | ESD | 0402 | Bi- 5V/0.3pF | D3 |
ASMCJ36CA-HF | TVS | SMC | Bi- 36V/1500W | D1 |
ASMCJ24CA-HF | TVS | SMC | Bi- 24V/1500W | D1 |
ACDBW0540-HF | Schottky | SOD-123 | 40V/0.5A | D2 |
ACDBMS140-HF | Schottky | SOD-123F | 40V/1A | D2 |
ACDBMT140-HF | Schottky | SOD-123H | 40V/1A | D2 |
BMS 電池管理系統
Battery Management System :High voltage power supply for motor 380~420V Low voltage power supply for control panel (Precision action, start up or switch off )
電池管理系統:馬達高壓電源380~420V 控制面板低壓電源(精確執行,啟動或關閉)
P/N | Product | Package | Specification | RefDes |
ATV15C260JB-HF | TVS | SMC | 26V/1500W | D1 |
ATV04A240JB-HF | TVS | SMA | 24V/400W | D1 |
ATV06A330JB-HF | TVS | SMA | 33V/600W | D1 |
ABZT52B3V3-HF | Zener | SOD-123 | 3.3V/0.5W | D2 |
ACDBW0540-HF | Schottky | SOD-123 | 40V/0.5A | D3,D4 |
ACDBMS140-HF | Schottky | SOD-123F | 40V/1A | D3,D4 |
ACPDQC5V0ESPC-HF | ESD | SOT-23 | Bi- 24V/10pF | D5 |
ACPDT-24VE-HF | ESD | SOT-23 | Bi- 24V/20pF | D5 |
A2N7002H-HF | MOSFET | SOT-23 | 60V/0.3A | Q1 |
ACMSN2312T-HF | MOSFET | SOT-23 | 20V/4.9A | Q1 |
Dashcam 行車紀錄器
Aftermarket installed product. TVS, Schottky, ESD are commonly used as protection and transmission
售後安裝產品。 TVS、蕭特基、ESD常用作保護和傳輸
P/N | Product | Package | Specification | RefDes |
ATV30C260JB-HF | TVS | SMC | 26V/3000W | D1 |
ATV15C260JB-HF | TVS | SMC | 26V/1500W | D1 |
ACDBA340-HF | Schottky | SMA | 40V/3A | D2 |
ACDBA360-HF | Schottky | SMA | 60V/3A | D2 |
ACDBC540-HF | Schottky | SMC | 40V/5A | D2 |
ACDBC560-HF | Schottky | SMB | 60V/5A | D3 |
ACDBW0540-HF | Schottky | SOD-123 | 40V/0.5A | D4 |
ACDBMS140-HF | Schottky | SOD-123F | 40V/1A | D4 |
ACPDZC5V0SPC-HF | ESD | 0201 | 5V/0.2Pf | D5 |
ACPDZC5V0C-HF | ESD | 0201 | 5V/3Pf | D5 |
CPDVR5V0-HF | ESD | 0402 | 5V/12Pf | D5 |
A2N7002H-HF | MOSFET | SOT-23 | 60V/0.3A | Q1 |
ACMSN2312T-HF | MOSFET | SOT-23 | 20V/4.9A | Q1 |
ADAS 高級輔助駕駛系統
Advanced Driver Assistance System. Millimeter wave radar is employed for the pedestrian detection and vehicle distance detection
高級駕駛輔助系統。 毫米波雷達用於行人檢測和車距檢測
P/N | Product | Package | Specification | RefDes |
ATV02 ~ ATV30 series | TVS | SOD-123~SMC | 200W~3000W | D1 |
ACPDUC24V-HF | ESD | 0603 | Bi- 24V/10pF | D2,D3 |
ACPDQC5V0CSP-HF | ESD | 0402 | Bi- 5V/0.3pF | D2,D3 |
ACPDUC5V0-HF | ESD | 0603 | Bi- 5V/15pF | D2,D3 |
ACDBW0540-HF | Schottky | SOD-123 | 40V/0.5A | D4,D5 |
ACDBMS140-HF | Schottky | SOD-123F | 40V/1A | D4,D5 |
A2N7002H-HF | MOSFET | SOT-23 | 60V/0.3A | Q1,Q2 |
ACMSN2312T-HF | MOSFET | SOT-23 | 20V/4.9A | Q1,Q2 |
TPS/TX
TX Module is employed for the tire pressure detection and temperature of tire.
Because it continue using for a long period, 3 voltage lithium battery is the main power supply and it requires energy-saving components.
Antenna will increase voltage during transmitting, thus ESD is required as protection.
TX Module用於輪胎的胎壓檢測和溫度檢測。
由於長期持續使用,3伏鋰電池是主要電源,需要節能元件。
天線在傳輸過程中會增加電壓,因此需要ESD作為保護。
P/N | Product | Package | Specification | RefDes |
ACPDQC5V0CSP-HF | ESD | 0402 | Bi- 5V/0.3pF | D1 |
CJ2301 | MOSFET | SOT-23 | P-CH/20V | Q1 |
TPS/RX
RX Module main purpose is interpretation of data from Tx
The monitor main power supply is from Car battery. The power regulation of IC or MCU may destruct by Battery Surge; therefore placed in ESD or TVS as protection. Display Button occasionally been pressed, also ESD could breakdown MCU or RF IC from inside, thus ESD is required as protection.
RX 模塊的主要目的是解釋來自 Tx 的數據
顯示器主電源來自汽車電池。 IC或MCU的電源調節可能會被電池浪湧破壞; 因此置於 ESD 或 TVS 中作為保護。 顯示按鈕偶爾被按下,ESD也可能從內部擊穿MCU或RF IC,因此需要ESD作為保護。
P/N | Product | Package | Specification | RefDes |
ATV02 ~ ATV30 series | TVS | SOD-123~SMC | 200W~3000W | D1 |
ACPDUC24V-HF | ESD | 0603 | Bi- 24V/10pF | D2 |
ACPDQC5V0CSP-HF | ESD | 0402 | Bi- 5V/0.3pF | D2 |
ACPDUC5V0-HF | ESD | 0603 | Bi- 5V/15pF | D3 |
Sunlight Sensor 陽光感測器
The sensor detects the intensity of the rain and transmits its information to the windshield wiper's control electronics.
傳感器檢測雨的強度並將其訊息傳輸到擋風玻璃雨刷的控制設備。
P/N | Product | Package | Specification | RefDes |
ATV15C260JB-HF | TVS | SMC | 26V/1500W | D1 |
ATV15CXXXJB-HF | TVS | SMC | 1500W | D1 |
ACDBA340-HF | Schottky | SMA | 40V/3A | D2 |
ACDBA360-HF | Schottky | SMA | 60V/3A | D2 |
ACDBB540-HF | Schottky | SMB | 40V/5A | D2 |
ACDBC540-HF | Schottky | SMC | 40V/5A | D2 |
ACPDQC5V0ESPC-HF | ESD | 0402 | Bi- 5V/0.3pF | D3 |
ACPDT-24VE-HF | ESD | SOT-23 | Bi- 24V/20pF | D3 |
ACPDUC24V-HF | ESD | 603 | Bi- 24V/10pF | D3 |
ACGRTS4007-HF | Rectifier | SOD-123L | 1000V/1A | D4 |
Instrument Cluster 儀表板
Instrument Cluster backlight is mainly use in LED light up or brightness adjustment to provide a richer vision. It will pass through Schottky,Mosfet and become the switch. In addition, LED can adapt TVS to protect and avoid the damage from the surge.
儀表組背光主要用於LED點亮或亮度調節,以提供更豐富的視覺效果。 它將通過蕭特基、Mosfet 成為開關。 此外,LED可以適配瞬態電壓抑制二極體來保護和避免浪湧的損壞。
P/N | Product | Package | Specification | RefDes |
ATV15260JB-HF | TVS | SMC | 26V/1500W | D1,D4 |
ATV15CXXXJB-HF | TVS | SMC | 1500W | D1,D4 |
ACPDUC24V-HF | ESD | 603 | Bi- 24V/10pF | D2 |
ACPDUC24VE-HF | ESD | 603 | Bi- 24V/16pF | D2 |
ACDBA360-HF | Schottky | SMA | 60V/3A | D3 |
CMS50P04D-HF | P-Mosfet | TO252 | -40V/-11A | Q1 |
LED Headlight LED頭燈
The battery input will cause alternating current wave because of back electromotive force. Therefore, place TVS at the input of the battery.
電池輸入會因為反電動勢而產生交流波。 因此,將瞬態電壓抑制二極體置於電池的輸入端。
P/N | Product | Package | Specification | RefDes |
ATV15C260JB-HF | TVS | SMC | 26V/1500W | D1,D3 |
ATV15CXXXJB-HF | TVS | SMC | 1500W | D1,D3 |
ACPDUC24V-HF | ESD | 0603 | Bi- 24V/10pF | D2 |
ACPDUC24VE-HF | ESD | 0603 | Bi- 24V/16pF | D2 |
ACDBA360-HF | Schottky | SMA | 60V/3A | D4 |
ACDBC540-HF | Schottky | SMC | 40V/5A | D4 |
CMS50N10D-HF | N-MOSFET | TO-252 | 100V/50A | Q1 |
LED Tail Light LED尾燈
The tail input and stop input power busbars are recommended to use Rectifier, Schottky or Switch diode because of reverse voltage protection when there is a peak in voltage to ensure the LED Control IC won't breakdown.
建議尾燈輸入和煞車燈輸入電源使用 整流器,蕭特基或開關二極管,因為反向電壓保護當電壓出現峰值時,以確保 LED 控制 IC 不會故障。
P/N | Product | Package | Specification | RefDes |
ACDBA340-HF | Schottky | SMA | 3A/40V | D1,D2 |
ACGRKM4005-HF | Rectifier | SOD-123 | 1A/600V | D1,D2 |
ACDSW4148-HF | Switching | SOD-123 | 300mA/75V | D1,D2 |
ACZRM Series | Zener | SOD-123 | 500mW | D3 |
ACZA4745-HF | Zener | SMA | 1W | D3 |
CMS50P04D-HF | P-Mosfet | TO252 | -40V/-11A | Q1,Q2 |