FLYiNG 零件編號 | ICCD74HC4051M96TI |
FLYiNG 庫存現貨 | 電洽/Contact |
製造商 | TEXAS INSTRUMENTS |
製造商零件編號 | CD74HC4051M96 |
說明 | CD74HC4051M96 SOIC-16 TI |
無鉛狀態 / RoHS 指令狀態 | RoHS |
訂購數量 | NTD 單價 / PCS |
1~9 | 15 |
10~99 | 10 |
封裝/外殼 | SOIC-16 |
標準包裝數量 | 2500/REEL 捲軸 |
文件:CDx4HC405x, CD4HCT405x
CDx4HC405x, CD4HCT405x
High-Speed CMOS Logic Analog Multiplexer and Demultiplexer
Features
The CDx4HC405x and CDx4HCT405x device is a digitally controlled analog switch that uses silicon gate CMOS technology to achieve operating speeds similar to LSTTL with the low-power consumption of standard CMOS integrated circuits.
This analog multiplexer and demultiplexer controls analog voltages that may vary across the voltage supply range (for example, VCC to VEE). It is a bidirectional switch that allows any analog input to be used as an output and vice versa. The switch has low ON resistance and low OFF leakages. In addition, this device has an enable control that, when high, disables all switches to their OFF state.
CDx4HC405x, CD4HCT405x
高速 CMOS 邏輯模擬多工器和解多工器
特點
CDx4HC405x, CD4HCT405x
High-Speed CMOS Logic Analog Multiplexer and Demultiplexer
Features
- Qualified for automotive applications
- Wide analog input voltage range: ±5V maximum
- Low ON-resistance:
- 70Ω typical (VCC – VEE = 4.5V)
- 40Ω typical (VCC – VEE = 9V)
- Low crosstalk between switches
- Fast switching and propagation speeds
- Break-before-make switching
- Wide operating temperature range: –40°C to +125°C
- Operation control voltage: 4.5V to 5.5V
- Switch voltage: 0V to 10V
- Direct LSTTL input logic compatibility VIL = 0.8V maximum, VIH = 2V minimum
- CMOS input compatibility II≤ 1μA at VOL, VOH
- Digital radio
- Signal gating
- Factory automation
- Televisions
- Appliances
- Programmable logic circuits
- Sensors
The CDx4HC405x and CDx4HCT405x device is a digitally controlled analog switch that uses silicon gate CMOS technology to achieve operating speeds similar to LSTTL with the low-power consumption of standard CMOS integrated circuits.
This analog multiplexer and demultiplexer controls analog voltages that may vary across the voltage supply range (for example, VCC to VEE). It is a bidirectional switch that allows any analog input to be used as an output and vice versa. The switch has low ON resistance and low OFF leakages. In addition, this device has an enable control that, when high, disables all switches to their OFF state.
CDx4HC405x, CD4HCT405x
高速 CMOS 邏輯模擬多工器和解多工器
特點
- 通過汽車應用認證
- 寬模擬輸入電壓範圍:±5V 最大值
- 低導通電阻:
- 70Ω 典型值 (VCC – VEE = 4.5V)
- 40Ω 典型值 (VCC – VEE = 9V)
- 開關之間的串擾低
- 快速切換和傳播速度
- 斷開前先接通(Break-before-make)切換
- 寬工作溫度範圍:–40°C 至 +125°C
- 操作控制電壓:4.5V 至 5.5V
- 開關電壓:0V 至 10V
- 直接 LSTTL 輸入邏輯兼容性 VIL = 0.8V 最大,VIH = 2V 最小
- CMOS 輸入兼容性 II≤ 1μA 在 VOL, VOH
- 數字收音機
- 信號門控
- 工廠自動化
- 電視
- 家用電器
- 可編程邏輯電路
- 傳感器
CDx4HC405x 和 CDx4HCT405x 器件是使用矽閘 CMOS 技術的數字控制模擬開關,可達到與 LSTTL 相似的工作速度,並具有標準 CMOS 集成電路的低功耗。該模擬多工器和解多工器控制的模擬電壓可在電源電壓範圍內變化(例如,VCC 到 VEE)。這是一個雙向開關,允許任何模擬輸入用作輸出,反之亦然。該開關具有低導通電阻和低關斷漏電流。此外,該器件具有一個使能控制,當高電平時,將所有開關禁用至關斷狀態。