圖片僅供參考
| FLYiNG 零件編號 | ICUCA9306GSM1RUTC |
| FLYiNG 庫存現貨 | 電洽/Contact |
| 製造商 | UTC |
| 製造商零件編號 | UCA9306G-SM1-R |
| 說明 | LINEAR IC UCA9306G-SM1-R MSOP-8 |
| 無鉛狀態 / RoHS 指令狀態 | RoHS/Halogen Free |
| 電壓比較器 Voltage Comparator | LINEAR INTEGRATED CIRCUIT |
| 製造商 | UTC |
| 系列 | UCA9306 |
| 接面溫度 | 150°C |
| 封裝／外殼 | MSOP-8 |
| 安裝類型 | SMD 表面黏著式 |
| 無鉛狀態 RoHS | RoHS/Halogen Free |
文件:UCA9306.png)
無衝突金屬聲明書
UCA9306 CMOS IC
DUAL BIDIRECTIONAL I2C BUS AND SMBUS VOLTAGE-LEVEL TRANSLATOR
DESCRIPTION
The UTC UCA9306 device is a dual bidirectional I2C and SMBus voltage-level translator with an enable(EN) input, and is operational from 1.2-V to 3.3-V VREF1 and 1.8-V to 5.5-V VREF2.
The UTC UCA9306 device allows bidirectional voltage translations between 1.2V and 5V,without the use of a direction pin .The low ON-state resistance (RON) of the switch allows connections to be made with minimal propagation delay. When EN is high, the translator switch is ON , and the SCL1 and SDA1 I/O are connected to the SCL2 and SDA2 I/O, respectively, allowing bidirectional data flow between ports. When EN is low, the translator switch is off, and a high-impedance state exists between ports.
In addition to voltage translation, the UTC UCA9306 device can be used to isolate a 400-kHz bus from a 100-kHz busby controlling the EN pin, and disconnecting the slower bus during fast-mode communication.
FEATURES
無衝突金屬聲明書
UCA9306 CMOS IC
DUAL BIDIRECTIONAL I2C BUS AND SMBUS VOLTAGE-LEVEL TRANSLATOR
DESCRIPTION
The UTC UCA9306 device is a dual bidirectional I2C and SMBus voltage-level translator with an enable(EN) input, and is operational from 1.2-V to 3.3-V VREF1 and 1.8-V to 5.5-V VREF2.
The UTC UCA9306 device allows bidirectional voltage translations between 1.2V and 5V,without the use of a direction pin .The low ON-state resistance (RON) of the switch allows connections to be made with minimal propagation delay. When EN is high, the translator switch is ON , and the SCL1 and SDA1 I/O are connected to the SCL2 and SDA2 I/O, respectively, allowing bidirectional data flow between ports. When EN is low, the translator switch is off, and a high-impedance state exists between ports.
In addition to voltage translation, the UTC UCA9306 device can be used to isolate a 400-kHz bus from a 100-kHz busby controlling the EN pin, and disconnecting the slower bus during fast-mode communication.
FEATURES
- 2-Bit Bidirectional Translator for SDA and SCL Lines in Mixed-Mode I2C Applications
- I2C and SMBus Compatible
- LessThan1.5-ns Maximum Propagation Delay to Accommodate Standard-Mode and Fast-Mode I2C Devices and Multiple Masters
- Allows Voltage-Level Translation Between
1.2V VREF1 and 1.8-V,2.5-V,3.3-V,or 5-V VREF2
1.8V VREF1 and 2.5-V,3.3-V,or 5-V VREF2
2.5V VREF1 and 3.3-V or 5-V VREF2
3.3V VREF1 and 5-V VREF2 - Provides Bidirectional Voltage Translation With No Direction Pin
- Low 3.5-Ω ON-State Resistance Between Input And Output Ports Provides Less Signal Distortion
- Open-Drain I2C I/O Ports(SCL1,SDA1,SCL2,and SDA2)
- 5-V Tolerant I2C I/O Ports to Support Mixed-Mode Signal Operation
- High-Impedance SCL1,SDA1,SCL2,and SDA2 Pins for EN=Low
- Lockup-Free Operation for Isolation When EN=Low
- Flow-Through Pinout for Ease of Printed-Circuit-Board Trace Routing
UCA9306 CMOS 集成電路
雙向 I2C 線和 SMBus 電壓電平轉換器
描述
UTC UCA9306 是一款雙向 I2C 和 SMBus 電壓電平轉換器，具備使能（EN）輸入，工作範圍為 1.2V 至 3.3V 的 VREF1 和 1.8V 至 5.5V 的 VREF2。
UTC UCA9306 支援 1.2V 至 5V 之間的雙向電壓轉換，無需使用方向控制引腳。開關的低導通電阻（RON）可實現最小的傳播延遲。當 EN 為高電平時，轉換器開關導通，SCL1 和 SDA1 I/O 分別連接至 SCL2 和 SDA2 I/O，實現雙向數據流。當 EN 為低電平時，轉換器開關關閉，兩端處於高阻抗狀態。
除了電壓轉換，UTC UCA9306 還可用於通過控制 EN 引腳將 400-kHz 線路與 100-kHz 線路隔離，從而在快速模式通信時斷開較慢的線路。
特點
- 適用於混合模式 I2C 應用的 SDA 和 SCL 線路的雙位雙向轉換器
- 與 I2C 和 SMBus 相容
- 最大傳播延遲小於 1.5ns，適用於標準模式和快速模式 I2C 裝置及多主機
- 支援以下電壓電平轉換：
- 1.2V VREF1 與 1.8V、2.5V、3.3V 或 5V VREF2
- 1.8V VREF1 與 2.5V、3.3V 或 5V VREF2
- 2.5V VREF1 與 3.3V 或 5V VREF2
- 3.3V VREF1 與 5V VREF2
- 提供無方向引腳的雙向電壓轉換
- 低 3.5-Ω 導通電阻，減少信號失真
- 開漏 I2C I/O 引腳（SCL1、SDA1、SCL2 和 SDA2）
- 支援混合模式信號操作的 5V 耐受性 I2C I/O 引腳
- 當 EN 為低電平時，SCL1、SDA1、SCL2 和 SDA2 引腳處於高阻抗狀態
- 無鎖定操作，實現 EN 為低電平時的隔離
- 流通式引腳設計，便於印刷電路板佈線
