| FLYiNG 零件編號 | ICUVXS0102GS08RUTC |
| FLYiNG 庫存現貨 | 電洽/Contact |
| 製造商 | UTC |
| 製造商零件編號 | UVXS0102G-S08-R |
| 說明 | LINEAR IC UVXS0102G-S08-R SOP-8 UTC |
| 無鉛狀態 / RoHS 指令狀態 | RoHS / Halogen free |
| DC-DC開關穩壓器 DC-DC Switching Regulator | LINEAR INTEGRATED CIRCUIT |
| 製造商 | UTC |
| 系列 | UVXS0102 |
| 原廠料號 | UVXS0102G-S08-R |
| 封裝／外殼 | SOP-8 |
| 安裝類型 | SMD 表面黏著式 |
| 無鉛狀態 RoHS | RoHS / Halogen free |
| 標準包裝數量 | 2500/Reel |
文件:UVXS0102 UTC.png)
無衝突金屬聲明書
UVXS0102 CMOS IC
2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS
DESCRIPTION
無衝突金屬聲明書
UVXS0102 CMOS IC
2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS
DESCRIPTION
The UTC UVXS0102 is a two-bit non-inverting bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems.
The UTC UVXS0102 separates A ports with B ports, and both ports are configurable power-supply rails, with the A ports supporting operating voltages from 1.65V to 3.6V, and the B ports supporting operating voltages from 2.3V to 5.5V. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8V, 2.5V, 3.3V, and 5V voltage nodes.
All I/Os of the UTC UVXS0102 are placed in the high-impedance state when the output-enable (OE) input is low, which significantly reduces the power-supply quiescent current consumption. So, to ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
FEATURES
The UTC UVXS0102 separates A ports with B ports, and both ports are configurable power-supply rails, with the A ports supporting operating voltages from 1.65V to 3.6V, and the B ports supporting operating voltages from 2.3V to 5.5V. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8V, 2.5V, 3.3V, and 5V voltage nodes.
All I/Os of the UTC UVXS0102 are placed in the high-impedance state when the output-enable (OE) input is low, which significantly reduces the power-supply quiescent current consumption. So, to ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
- Maximum Data Rates
24 Mbps (Push Pull)
2 Mbps (Open Drain) - 1.65V~3.6V on A ports and 2.3V~5.5V on B ports (VCCA≤VCCB)
- No Direction-Control Signal Needed
- VCC Isolation Feature: If either VCC input is at GND, both ports are in the High-Impedance state
- No Power-Supply Sequencing Required: Either VCCA or VCCB can be ramped first
- Ioff Supports Partial-Power-Down Mode Operation
UVXS0102 CMOS IC
2位元雙向電壓層級轉換器，用於開漏和推挽應用
描述
UTC UVXS0102 是一款兩位元非反相雙向電壓層級轉換器，可用於在混合電壓系統間建立數字開關的兼容性。
UTC UVXS0102 將 A 端口和 B 端口分離，兩者均為可配置的電源軌。A 端口支持 1.65V 至 3.6V 的工作電壓，B 端口支持 2.3V 至 5.5V 的工作電壓。這使其能夠在 1.8V、2.5V、3.3V 和 5V 電壓節點之間提供雙向電壓轉換能力，支持更低或更高的邏輯信號層級。
當輸出使能 (OE) 輸入為低時，UTC UVXS0102 的所有 I/O 端口均處於高阻抗狀態，顯著降低了電源的靜態電流消耗。為確保在上電或斷電期間保持高阻抗狀態，OE 應通過下拉電阻接至 GND；該電阻的最小值由驅動器的電流供應能力決定。
特性
- 最大數據速率：
- 24 Mbps (推挽模式)
- 2 Mbps (開漏模式)
- A 端口電壓範圍：1.65V~3.6V
- B 端口電壓範圍：2.3V~5.5V (VCCA ≤ VCCB)
- 無需方向控制信號
- VCC 隔離特性：若任一 VCC 輸入接地，兩端口均處於高阻抗狀態
- 無需電源時序：VCCA 或 VCCB 均可先啟動
- Ioff 特性：支持部分斷電模式操作
