圖片僅供參考
| FLYiNG 零件編號 | PILM2940HS-3.3 |
| FLYiNG 庫存現貨 | 10 |
| 製造商 | TAEJIN Technology |
| 製造商零件編號 | LM2940HS-3.3 |
| 說明 | LM2940HS-3.3V SOT-223 HTC |
| 無鉛狀態 / RoHS 指令狀態 | RoHS |
| 訂購數量 | NTD 單價 / PCS |
| 1~9 | 8 |
| 10~99 | 5.9 |
| 100~2499 | 4.8 |
| 2500~ | 3 |
| 積體電路類型 | 1A LOW DROPOUT REGULATOR |
| 製造商 | TAEJIN Technology |
| 系列 | LM2940 |
| 原廠料號 | LM2940HS-3.3 |
| 輸出電壓 | 3.3V |
| 壓差電壓 | 110~230 |
| 最大輸出電流 | 20mA |
| 工作溫度 | -40~125°C |
| 無鉛狀態RoHS | RoHS |
| 封裝／外殼 | SOT-223 3L |
| 安裝類型 | SMD 表面黏著式 |
| 標準包裝數量 | 2500/Reel Tape Reel 捲裝 |
LM2940H 1.0A Low Dropout Voltage Regulator
FEATURES
The LM2940H fixed positive voltage regulator features the ability to source 1.0A of output current with a dropout voltage of typically 0.4V and a maximum of 0.7V over the entire temperature range.
Designed also for vehicular applications, the LM2940H and all regulated circuitry are protected from reverse battery installations or 2-battery jumps. During line transients, such as load dump when the input voltage can momentarily exceed the specified maximum operating voltage, the regulator will automatically shut down to protect both the internal circuits and load. Short circuit and thermal overload protection are also provided.
LM2940H 1.0A 低壓差穩壓器
特徵
LM2940H 固定正電壓穩壓器能夠提供 1.0A 的輸出電流，在整個溫度範圍內的壓差電壓通常為 0.4V，最大值為 0.7V。
LM2940H 和所有穩壓電路也專為車載應用而設計，可防止電池反向安裝或 2 節電池跳接。 在線路瞬變期間，例如當輸入電壓可能瞬間超過指定最大值時的負載突降工作電壓，穩壓器將自動關閉，以保護內部電路和負載。 還提供短路和熱過載保護。
FEATURES
- Operational VIN up to +26V
- +60V/−20V Voltage Transients
- Output Current in Excess 1.0A
- Dropout Voltage typically 0.4V @ IOUT = 1.0A
- Reverse Battery Protection
- Internal Short Circuit Current Limit
- Available with 3.3V and 5.0V Output Voltage
The LM2940H fixed positive voltage regulator features the ability to source 1.0A of output current with a dropout voltage of typically 0.4V and a maximum of 0.7V over the entire temperature range.
Designed also for vehicular applications, the LM2940H and all regulated circuitry are protected from reverse battery installations or 2-battery jumps. During line transients, such as load dump when the input voltage can momentarily exceed the specified maximum operating voltage, the regulator will automatically shut down to protect both the internal circuits and load. Short circuit and thermal overload protection are also provided.
LM2940H 1.0A 低壓差穩壓器
特徵
- 工作 VIN 高達 +26V
- +60V/−20V 電壓瞬變
- 輸出電流超過 1.0A
- 壓差電壓通常為 0.4V @ IOUT = 1.0A
- 反向電池保護
- 內部短路電流限制
- 提供 3.3V 和 5.0V 輸出電壓
LM2940H 固定正電壓穩壓器能夠提供 1.0A 的輸出電流，在整個溫度範圍內的壓差電壓通常為 0.4V，最大值為 0.7V。
LM2940H 和所有穩壓電路也專為車載應用而設計，可防止電池反向安裝或 2 節電池跳接。 在線路瞬變期間，例如當輸入電壓可能瞬間超過指定最大值時的負載突降工作電壓，穩壓器將自動關閉，以保護內部電路和負載。 還提供短路和熱過載保護。
