| FLYiNG 零件編號 | ICUTXS0108GP20RUTC |
| FLYiNG 庫存現貨 | 電洽/Contact |
| 製造商 | UTC |
| 製造商零件編號 | UTXS0108G-P20-R |
| 說明 | LINEAR IC UTXS0108G-P20-R TSSOP-20 UTC |
| 無鉛狀態 / RoHS 指令狀態 | RoHS / Halogen free |
| DC-DC開關穩壓器 DC-DC Switching Regulator | LINEAR INTEGRATED CIRCUIT |
| 製造商 | UTC |
| 系列 | UTXS0108 |
| 原廠料號 | UTXS0108G-P20-R |
| 封裝／外殼 | TSSSOP-20 |
| 安裝類型 | SMD 表面黏著式 |
| 無鉛狀態 RoHS | RoHS / Halogen free |
| 標準包裝數量 | 1000/REEL 捲軸 |
文件:UTXS0108 UTC.png)
無衝突金屬聲明書
UTXS0108 CMOS IC
8-BIT BIDIRECTIONAL, LEVEL-SHIFTING, VOLTAGE TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATION
DESCRIPTION
This 8-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.4V to 3.6V.The B port is designed to track VCCB. VCCA must be less than or equal to VCCB. VCCB accepts any supply voltage from 1.65V to 5.5V. This allows for low voltage bidirectional translation between any of the 1.5V, 1.8V, 2.5V, 3.3V, and 5V voltage nodes.
When the output-enable(OE) input is low, all outputs are placed in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
FEATURES
無衝突金屬聲明書
UTXS0108 CMOS IC
8-BIT BIDIRECTIONAL, LEVEL-SHIFTING, VOLTAGE TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATION
DESCRIPTION
This 8-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.4V to 3.6V.The B port is designed to track VCCB. VCCA must be less than or equal to VCCB. VCCB accepts any supply voltage from 1.65V to 5.5V. This allows for low voltage bidirectional translation between any of the 1.5V, 1.8V, 2.5V, 3.3V, and 5V voltage nodes.
When the output-enable(OE) input is low, all outputs are placed in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
FEATURES
- 1.4V to 3.6V on A port and 1.65V to 5.5V on B Port (VCCA≤VCCB)
- No power-supply sequencing required – either VCCA or VCCB canbe ramped first
- No direction-control signal needed
- Handset
- Smartphone
- Tablet
- Desktop PC
UTXS0108 CMOS IC
8位元雙向電平轉換電壓翻譯器，適用於開漏和推拉應用
描述
UTXS0108 是一款8位元非反向翻譯器，用於雙向電壓電平轉換，可實現混合電壓系統之間的數字切換兼容性。它使用兩個可配置的獨立電源軌。
- A端口設計為追隨VCCA，VCCA可接受1.4V至3.6V的電源電壓。
- B端口設計為追隨VCCB，且VCCA必須小於或等於VCCB。VCCB可接受1.65V至5.5V的電源電壓。
這使得在1.5V、1.8V、2.5V、3.3V和5V電壓節點之間進行低電壓雙向轉換成為可能。當輸出使能（OE）輸入為低時，所有輸出處於高阻態。
為確保在啟動或關機期間處於高阻態，OE應通過下拉電阻接地，該電阻的最小值取決於驅動器的電流驅動能力。
特性
- A端口電壓範圍：1.4V至3.6V；B端口電壓範圍：1.65V至5.5V（VCCA ≤ VCCB）
- 不需要電源順序：VCCA或VCCB均可先上升
- 無需方向控制信號
應用
- 手機
- 智慧型手機
- 平板電腦
- 桌上型電腦
